Wetmore Tool and Engineeringc
Wetmore Tool and Engineering

Carbide/PCD

TOOLS FOR COMPOSITES - "SPECIAL MADE TO ORDER"

* Series 2200 "Drivematic" Drill & Countersink

series2200

* Series 2300 "Spacematic" Drill & Countersink
"Used with Drivematic (GEMCOR) and Spacematic drillmotors common to the industry for controlled Feed/Speed on materials such a scarbon-carbon fiber, aluminum, fiberglass, titanium and/or a combination of these materials...

series2300

* * Series 2400 (Two Flute) Pilot Countersinks
series2400

* * Series 2500 (Three Flute) Pilot Countersinks
**Used to countersink drilled holes in aluminum, graphite, fiberglass,etc. These tools come with standard threaded shanks that fit conventional microstop countersink cages ...

series2500

* * Series 1435A "Honeycomb" Router
Recommended for honeycomb panels and kevlar. Designed with "opposing flutes" (right hand/left hand) which compresses the material and produces a clean cut on top and bottom with no delamination or "Fuzz" ...

series1435A

Series 2600 Solid Carbide Fluted Routers
This style router works well in a down-cut configuration in a hand routing or CNC routing of aluminum.

series2600

Series 2700 Diamond Cut Routers
Long accepted as a standard for routing fiberglass materials, this tool is also being used for routing carbon-carbon materials

series2700

Series 2800 Nut Plate Drill & Countersink
Available in the two common sizes in the industry, and used in conjunction with a nutplate drillmotor. Drill sizes are #30 and #40 both available on 3/16 and 1/4 body with threaded shanks.

series2800

Series 3000 Dagger Drills
Used with controlled feed/speed drillmotors such as the Quackenbush, this drill is designed to produce delamination free holes in graphite materials and/or graphite/aluminum provided the material does not exceed 1/4" thickness...

series3000

Series 3200 Tapered Drill-Reamer
Also known as a "one-shot" drill this tool can be used for hand drilling (through bushings) or with controlled feed/speed drillmotors. Originally developed for drilling fiberglass, these drills are also excellent for drilling graphite composites....

series3200

Series 3300 Parabolic Fluted Drills
 Recommended for "Deep-hole" drilling in non-ferrous materials such as aluminum, fiberglass, graphite, plastics, etc.

series3300

Series 2000 8 Facet Point Twist Drill
The 8 facet point geometry was developed for high production delamination free holes in graphite and fiberglass materials.

series2000-8

Series 2000 K Kev-Point Twist Drill
"Kev-Point" geometry is designed to produce "Fuzz-free" holes in Kevlar (Aramid fiber) materials ...

series2000-k

 

© 2014 HP Wetmore  | 5091 G Street  |  Chino, CA 91710
909.364.1000  |  Fax 909.364.2333

Wetmore Tool and Engineering - Made in the USA
Made in the USA

divider dot dash 

Great Western registrar copy ISO

ISA Logo

USCTI_logo[1]

iso logo

 

aaa